How long has it been since your warm cup been cleaned properly? Drinking more hot drinks in winter is not only warm in body but also warm in your heart. Decorating beverages with a warm cup can also bring you a good mood to work, but how to clean the thermos? How to choose the best material? What drinks are best not to be equipped? Both doctors and experts gave suggestions.
Protein-containing and sugary drinks, you will have to finish drinking in one morning.Winter is here, and many people are used to bring a cup of hot coffee to warm up their work before going to work. They can also keep their hot drinks for the whole day when putting them in a warm cup. However, Yang Zonghai, director of the Linkou Changgeng Clinical Toxic Drug Center, reminded that "hot milk and sugary drinks" are not recommended to be placed in a temperature bottle for too long. It is best to drink it all in one morning to avoid microorganisms.
{9 2}Jong Zonghai pointed out that bacteria can breed and reproduce in an environment of 7℃ to 60℃. Medically, it is called "dangerous temperature belt". The cold and hot drinks in the temperature cup may not be in the dangerous temperature belt at the beginning, but after more than one morning, the temperature in the temperature cup will slowly fall on the dangerous temperature belt. Most bacteria such as "Staminococcus aureus" and "polygonum multiflorum" may grow in such an environment, causing health hazards. It must be cleaned and dried every day, and the gaps can be cleaned with cotton swabs.Sh Dunci, the nurse at the Clinical Toxic Center of Linkou Changgeng Hospital, also said that it is not recommended to store sugar-containing beverages in a temperature bottle for a long time, and it is not recommended to drinks containing "protein" such as bean paste, milk, iron, etc. Many office workers are busy with work and drink a cup of iron from morning to night. According to research, the number of beans in a warm cup has increased tenfold more than one morning.
"The temperature bottle must be cleaned and dried every day." Yu Dunci said that especially the temperature cups that contain beverages, you must clean the protein and sugar in the bottle, use a soft brush and a neutral cleaning agent to clean it. If there is a "silicon slab" on the temperature bottle, you must remove it and wash it clean. Do not put it back immediately after washing, and place it in the rind to dry. If it is not easy to clean the gap, you can use a cotton swab to clean it.
304 and 316 stainless steel materials are very stable and can withstand acid and corrosion resistance.How to choose the material of a temperature bottle? According to Yang Zonghai, there are 304 and 316 materials on the market, and the content of the turban elements is 18%, the 304 stainless steel bulb element is 8%, and the 316 stainless steel has 10%. The higher the content, the more stable it is. Whether it is a 304 or 316 stainless steel, it has good corrosion resistance. Any drink can be packed, and acidic beverages are also OK. You don’t have to worry too much. However, as long as you find that a raw lens occurs, you must replace the new temperature bottle tightly and should not be used again.
A sharp tool for cleaning and insulation bottles with carbonate, but it is not suitable for slab-like inner flap.Soak the cucumber, over-carbonate, and soak the cucumber on the Internet to clean and maintain the temperature bottle. Zhu Dunci said that carbonate is indeed a "weapon" for cleaning the temperature bottle, and the effect is more sterile and descaling than Xiao Su powdering. She herself also uses carbonate to clean the utensils every two or three months.
After carbonate and regular temperature water will not react, so you have to boil it with hot water. You can soak tableware, temperature flask and other utensils, take it out for one or two hours, then put it in the cleaning rag at home, and boil it again, and finally pour it into the sewer to clean the oil and dirt in the water pipe to eliminate the breeding of cockroaches and worms.
However, Yu Dunci reminds that not all temperature bottles are suitable for cleaning using the above methods. In order to "reduce weight", some thermoses will use a mattress-like inner lining. This type of thermos is not all made of stainless steel material, so it is not recommended to clean it in a strong way. Compared with the non-stick maintenance method, do not brush it vigorously, and it is not recommended to clean it with small sour, citric acid, or carbonate.
Avoid scrubbing with steel brushes or vegetable cloths, and use soft materials such as seaweed.Jong Zonghai said that the chemical elements of 304 and 316 stainless steel thermos are quite stable, so there is no need to worry about the problem of cleaning agents. These two thermos will not produce glans. Therefore, once the glans are produced on the bottle, it means that the material has been damaged and the operation must be changed immediately.
The Food and Drug Administration recommends that when cleaning food containers, it is recommended to use neutral detergents to avoid using acidic or singular detergents, and also avoid using steel brushes or vegetable cloths to brush, otherwise scratches are likely to be left. It is recommended to use brushes of soft materials such as sea cypress. If the container has scratches, cracks, color changes or breakage, it is recommended to change them immediately.
When should I change a new one? Can I still use the temperature bottle if I fall over?Zhen Dunci said that if the temperature bottle is only damaged outside and has no major damage, it is mainly necessary to observe the "inner". If you see uneven places, it is difficult to clean and easily hide dirt. Secondly, it may also affect the temperature maintenance effect. It is recommended to replace a new temperature bottle. If mold occurs in the contacts and silicone loses elasticity, it is recommended to change them.
How to clean a temperature bottle?1. All stainless steel material (304, 316)
Boil hot water and add carbonate, soak for 1 to 2 hours before cleaning. After use, the carbonate water can be reheated and poured into the sewer to clean the oil pipe.
2. The slab-like inner slab
is suitable for the maintenance method of non-stick. Do not use strong scrubs, citric acid, or over-carbonated slabs.
Responsible editor: Gu Zihuan