Cleaning method for basins
1. Oil stains and dirt can easily accumulate when used for a long time. For example, ceramic basins, you can use lemon slices to wash the surface of the wash basin and wait for a minute and then rinse it with clean water to become bright. If the stain is stubborn, you can pour it in with bleach, soak it for about 20 minutes, wash it with a towel or sponge, and then wash it with clean water.
2. The silicone or glass glue at the interface between the basin and the countertop will become moldy and turn black after being used for a long time. At this time, you can only use a putty knife and a utility knife to remove it. After cleaning, apply high-quality silicone. It is best to buy the type of mildew-proof silicone for kitchen and bathroom.
3. It is recommended to use pure cotton rags, neutral detergents, glass cleaning water, etc. for cleaning, so as to keep it as bright as new.
4. The stainless steel basin only needs to be cleaned and wiped with clean water or dishwashing liquid, and it can be as clean as new. Remember not to use cleaning cloth, sand powder or stainless steel balls to wipe the surface of the basin to keep the surface smooth.
Basin maintenance tips
1. Basin cleaning should be done frequently. You should not use strong acid and alkaline detergents, but use neutral detergents. Note that the materials of the wash basin belong to ceramics and glass, and do not rinse with hot water to avoid cracking of the wash basin. The rag material for cleaning the wash basin must be softer fabrics, such as sponges or cotton rags. Do not wipe it with rough materials such as brushes or hard objects.
2. During daily use, be careful not to throw some small things into the wash basin. This is not only not conducive to the cleaning of the wash basin, but also may be blocked due to items falling into the drain pipe. Just like falling hair, you should also be put away in time to avoid clogging.
3. Larger and heavier daily necessities should not be placed on the storage board above the wash basin. To a certain extent, the storage plate will not be able to bear it and fall on the wash basin and it will hit the wash basin violently.
4. Clean the water elbows in the basin from time to time, and use disassembly and cleaning methods to effectively avoid blockage of the water pipes. At the same time, the surface of the wash basin is inspected every three months to half a year to check for any concealed marks and repair them in time.